Articulo de referencia

Mezzanine

The mezzanine of the Maastricht Centre Céramique View of the mezzanine in the lobby of the former Capitol Cinema , Ottawa, Ontario , Canada A structural steel mezzanine used for...

The mezzanine of the Maastricht Centre Céramique
View of the mezzanine in the lobby of the former Capitol Cinema, Ottawa, Ontario, Canada
A structural steel mezzanine used for industrial storage
The mezzanine of Basarrate station in Bilbao Metro

A mezzanine (/ˌmɛzəˈnn/; or in Italian, mezzanino; mezzo means 'half' in Italian)[1] is an intermediate floor in a building which is partly open to the double-height ceilinged floor below, or which does not extend over the whole floorspace of the building. However, the term is often used loosely for the floor above the ground floor, especially where a very high-ceilinged original ground floor has been split horizontally into two floors.

Mezzanines may serve a wide variety of functions. Industrial mezzanines, such as those used in warehouses, may be temporary or semi-permanent structures. Mezzanines can be found in modern architecture as well.

In Royal Italian architecture, mezzanino also means a chamber created by partitioning that does not go up all the way to the arch vaulting or ceiling; these were historically common in Italy and France, for example in the palaces for the nobility at the Quirinal Palace.

Definition

A mezzanine is an intermediate floor (or floors) in a building which is open to the floor below.[2] It is placed halfway (mezzo means 'half' in Italian) up the wall on a floor which has a ceiling at least twice as high as a floor with minimum height.[3][4] A mezzanine does not count as one of the floors in a building, and generally does not count in determining maximum floorspace.[2] The International Building Code permits a mezzanine to have as much as one-third of the floor space of the floor below. Local building codes may vary somewhat from this standard.[2] A space may have more than one mezzanine, as long as the sum total of floor space of all the mezzanines is not greater than one-third the floor space of the complete floor below.[2]

Mezzanines help to make a high-ceilinged space feel more personal and less vast, and can create additional floor space.[5] Mezzanines, however, may have lower-than-normal ceilings[1] due to their location. The term "mezzanine" does not imply any particular function; mezzanines can be used for a wide array of purposes.[6][7]

Mezzanines are commonly used in modern architecture, which places a heavy emphasis on light and space.[3]

Industrial mezzanines

In industrial settings, mezzanines may be installed (rather than built as part of the structure) in high-ceilinged spaces such as warehouses. These semi-permanent structures are usually free-standing, can be dismantled and relocated, and are sold commercially. Industrial mezzanine structures can be supported by structural steel columns and elements, or by racks or shelves.[8] Depending on the span and the run of the mezzanine, different materials may be used for the mezzanine's deck like fibre cement boards.[9] Some industrial mezzanines may also include enclosed, paneled office space on their upper levels.[8] There are three basic types of industrial mezzanines: custom, standard or modular.

A structural engineer is sometimes hired to help determine whether the floor of the building can support a mezzanine (and how heavy the mezzanine may be), and to design the appropriate mezzanine.[9]

Custom mezzanines

Custom Mezzanines are steel, raised industrial platform structures that are designed specifically to match the space and capacity needs of a given facility. It will, at a minimum, include a stairway for accessing the mezzanine. These structures typically are the strongest in terms of support capacity.

Standard mezzanines

Standard mezzanines are steel, raised industrial platform structures that are completely self-supporting and are sold in predetermined sizes and shapes. These off-the-shelf structures are usually strong (in terms of support capacity) and less expensive than custom mezzanines.

Safety

Industrial safety gate for mezzanines
Dual-gate safety system used to protect workers in pallet drop areas on the ledges of a mezzanine

Los empleados que trabajan en el manejo de materiales y en la fabricación suelen estar en riesgo de sufrir caídas durante su jornada laboral. Cifras recientes muestran aproximadamente 20 000 lesiones graves y cerca de 100 muertes al año en instalaciones industriales. [ 10 ] Las caídas de personas y objetos desde entreplantas son motivo de especial preocupación. [ 11 ]

En muchas operaciones industriales, se realizan aberturas en la barandilla de los entrepisos y plataformas de trabajo elevadas para permitir la recogida de material paletizado que se carga y descarga, a menudo con una carretilla elevadora, en los niveles superiores. La Administración de Seguridad y Salud Ocupacional (OSHA) [ 12 ] y el Consejo Internacional de la Construcción (IBC) [ 13 ] han publicado reglamentos para la protección contra caídas y el Instituto Nacional Estadounidense de Estándares (ANSI) ha publicado normas para asegurar las áreas de descarga de palés para proteger a los trabajadores que trabajan en plataformas elevadas y están expuestos a aberturas.

En la mayoría de los casos, se utilizan puertas de seguridad para asegurar estas aberturas. La OSHA exige que las aberturas de 48 pulgadas (1,2 m) o más altas estén aseguradas con un sistema de protección contra caídas. [ 14 ] Se utilizarían secciones desmontables de barandilla o puertas que se abren o se deslizan para abrir el área y permitir la transferencia de material, y luego se cerrarían una vez que se haya retirado el material. Sin embargo, las normas ANSI actuales exigen sistemas de seguridad de doble puerta para la protección contra caídas. [ 15 ] 

Se crearon sistemas de seguridad de doble puerta para proteger estas áreas, lo que permite mantener una barrera en todo momento, incluso durante la carga y descarga de palés. Estos sistemas crean un puesto de trabajo completamente cerrado que protege al operario durante las operaciones de carga y descarga. Al abrirse la puerta trasera, la puerta del borde se cierra automáticamente, garantizando así que siempre haya una barrera entre el operario y el borde.

Véase también

Referencias

  1. 1 2 Harris 1983 , pág. 353.
  2. ^ Allen e Iano 2012 , pág . 303. 
  3. 1 2 Coates, Brooker y Stone 2008 , pág. 163.
  4. Khira, Rizwan (12 de noviembre de 2025). "¿Qué es un entrepiso?" . AL Kheera Steel Works .
  5. Robinson, Paula; Robinson, Phil (31 de mayo de 2006). "The Room Planners: Cómo añadir un altillo" . The Daily Telegraph . Archivado del original el 12 de enero de 2022. Consultado el 15 de mayo de 2016 .
  6. Habraken y Teicher 1998 , pág. 133.
  7. Guo 2010 , pág. 78.
  8. 1 2 Drury y Falconer 2003 , pág. 122.
  9. 1 2 Sociedad de Manejo y Gestión de Materiales 1993 , págs. 11-136.
  10. "Seminario del grupo industrial centrado en la seguridad en el almacén" . www.mmh.com . Consultado el 15 de septiembre de 2017 .
  11. Feingold, Jean (2017). "Protección de bordes: Manteniendo sus instalaciones seguras | MHI Solutions" . www.mhisolutionsmag.com . N.° Q1. 
  12. "Temas de seguridad y salud | Protección contra caídas: normas y políticas para trabajos no relacionados con la construcción | Administración de Seguridad y Salud Ocupacional" . www.osha.gov . Consultado el 15 de septiembre de 2017 .
  13. "IBC | ICC" . www.iccsafe.org . 2015-03-20 . Consultado el 2017-09-15 .
  14. "Escaleras. - 1910.23 | Administración de Seguridad y Salud Ocupacional" . www.osha.gov . Consultado el 15 de septiembre de 2017 .
  15. Asociación de Fabricantes de Equipos de Almacenamiento (2009), Especificación para el diseño, fabricación e instalación de plataformas de trabajo industriales de acero , MHI

Bibliografía

  • Aghayere, Abi O.; Vigil, Jason (2007). Diseño estructural en madera: un enfoque práctico . Hoboken, NJ: John Wiley. ISBN 978-0-470-05678-3.
  • Allen, Edward; Iano, Joseph (2012). The Architect's Studio Companion: Rules of Thumb for Preliminary Design . Hoboken, NJ: John Wiley & Sons. ISBN 978-0-470-64191-0.
  • Coates, Michael; Brooker, Graeme; Stone, Sally (2008). Diccionario visual de arquitectura y diseño de interiores . Lausana: AVA Academia. ISBN 9782940373802.
  • Drury, Jolyon; Falconer, Peter (2003). Edificios para almacenamiento y distribución industrial . Nueva York: Routledge. ISBN 0-7506-4819-8.
  • Guo, Qinghua (2010). Los edificios de cerámica Mingqi de la dinastía Han en China, 206 a. C.-220 d. C.: Representaciones arquitectónicas y arquitectura representada . Portland, Oregón: Sussex Academic Press. ISBN 978-1-84519-321-8.
  • Habraken, NJ; Teicher, Jonathan (1998). Estructura de lo ordinario: forma y control en el entorno construido . Cambridge, Massachusetts: MIT Press. ISBN 978-0-262-58195-0.
  • Harris, Cyril M. (1983). Diccionario ilustrado de arquitectura histórica . Nueva York: Dover Publications. ISBN 978-0-486-24444-0.
  • Sociedad de Manejo y Gestión de Materiales (1993). Sistema de Aprendizaje Profesional en Manejo de Materiales: Una Colección de Referencia Básica en Manejo de Materiales. Volumen 2. Charlotte, NC: Fundación para la Educación en Manejo de Materiales.
  • Medidas de seguridad adecuadas para plataformas de trabajo elevadas (vídeo de 1:37 min.)
  • Vídeo que muestra la construcción principal de un altillo industrial (vídeo de 2:46 minutos).